Automotive Electronic Solutions:
We have more than 20+ years of production experience in the production of automotive electronic components. We operates with IATF16949 system standards to provide customized inductors and resistors for well-known automotive manufacturers, to solve their all kinds of problems such as surge protection and EMC filtering during automotive charging, improve automotive reliability, and provide a clean electromagnetic environment for automotive.
Testing Instruments:
We are using superior equipment to ensure automotive inductor quality. We are now using MNIPAL4X-ray fluorescent spectroscope (made in PHILIPS Holand) to guarantee the products with ROHS EU co-mpliance. We are holding more than 300 sets of all kinds of electronic testing instruments (e.g. HP4192A,made in HP, USA) and more than 200 sets of automatic winding machines, ring winding machines made in Taiwan.
Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-A) | Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-A) | ||||
ITEM | STANDARD | Test Conditions | Operatingtemperature | View | |
Inductanc | L=4.0uH ± 10 | F=1.0KHz/0.3V | -40℃to +125℃ | ||
DC Resistance | Rdc=15mΩ max | ||||
Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-B) | Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-B) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=4.0uH ± 10 % | F=1.0KHz/0.3V | -40℃to +125℃ | ||
DC Resistance | Rdc=15mΩ max | ||||
Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-3) | Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-3) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=4.0uH ± 10 % | F=1.0KHz/1V | -40℃ to +125℃ | ||
DC Resistance | |||||
Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-4) | Filter Rod Inductor for Auto Wiper Motor (LGA-W0317-4uH-4) | ||||
ITEM | STANDAR | Test Conditions | Operating temperature | View | |
Inductanc | L=4.0uH ± 10 % | F=1.0KHz/1V | -40℃ to +125℃ | ||
DC Resistance | |||||
Filter Rod Inductor for Auto Wiper Motor (LGA-W0312-3.3uH) | Filter Rod Inductor for Auto Wiper Motor ( LGA-W0312-3.3uH) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=3.3±0.2uH | F=1.0KHz/0.3V | -40℃ to +125℃ | ||
DC Resistance | Rdc=25mΩ max | ||||
Filter Rod Inductor for Auto Wiper Motor (LGA-WL0315-1.1uH) | Filter Rod Inductor for Auto Glass Lifting Motor (LGA-WL0315-1.1uH) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=1.1uH ±20 % | F=1.0KHz/1V | -40℃ to +125℃ | ||
DC Resistance | Rdc=2.65mΩ±20% | ||||
Filter Rod Inductor for Auto Glass Lifting Motor (LGA-W0530-3.8uH) | Filter Rod Inductor for Auto Glass Lifting Motor (LGA-W0530-3.8uH) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=3.8uH ± 10 % | F=1.0KHz/0.3V | -40℃ to +125℃ | ||
DC Resistance | Rdc=5mΩ max | ||||
Filter Rod Inductor for Auto Glass Lifting Motor (LGA-W520-4.1uH) | Filter Rod Inductor for Auto Glass Lifting Motor (LGA-W520-4.1uH) | ||||
ITEM | STANDARD | Test Conditions | Operating temperature | View | |
Inductanc | L=4.1uH ±20 % | F=1KHz/1V | -40℃ to +125℃ | ||
DC Resistance | Rdc=6.2mΩmax | ||||
Rated Current | Ir=10A | ||||
Saturation Current | Isat=10A | ||||
Common Mode Choke for DC/DC Inverter (TCC-JG3113-39uH) | Common Mode Choke for DC/DC Inverter (TCC-JG3113-39uH) | |||||
ITEM | STANDARD | Test Conditions | Operatingtemperature |
| View | |
Inductanc | L1 L2:39uH±35% | F=100KHz | -40℃to +125℃ | |||
DC Resistance | R1 R2=2.73mΩ typ | |||||
| Rated Current | 1=20A | △T≤40℃ | ||||
HI-POT | AC2000V/5mA/2S | 50Hz | ||||
Common Mode Choke for DC/DC Inverter (TCC-JG3113-1.3uH) | Common Mode Choke for DC/DC Inverter (TCC-JG3113-1.3mH) | |||||
ITEM | STANDARD | Test Conditions | Operatingtemperature |
| View | |
Inductanc | L1 L2:1.3mH-30%+50% | F=100KHz | -40℃to +125℃ | |||
DC Resistance | R1 R2=2.84mΩ typ | |||||
| Rated Current | 1=20A | △T≤40℃ | ||||
HI-POT | AC2000V/5mA/2S | 50Hz | ||||
Precharge Resistor for OBC (RX27-8-60W-50RJ) | Precharge Resistor for OBC (RX27-8-60W-50RJ) | ||||||
Material | Thermal | Max Operating | Resistivity (μΩ·m) | Specific Heat Capacity (J/g·℃) | Density | View | |
Nickel-chromium alloy | 60.3 | 1200℃ | 1.09 | 0.44 | 8.4 | ||
Precharge Resistor for OBC (RX630-100W-150RJ) | Precharge Resistor for OBC (RX630-100W-150RJ) | ||||||
Material | Thermal | Max Operating | Resistivity (μΩ·m) | Specific Heat Capacity (J/g·℃) | Density | View | |
Nickel-chromium alloy | 60.3 | 1200℃ | 1.09 | 0.44 | 8.4 | ||
Precharge Resistor for DC/DC Inverter (RX615-25W-100KJ) | Precharge Resistor for DC/DC Inverter (RX615-25W-100KJ) | |||
| Power | Resistace value | Tolerance | View | |
25w | 100kΩ | ±5%（J） | ||
Item | Tested | Requirement | ||
| Overload | 2.5 times rated power or 2 times component limit voltage for 5 seconds | △R≤±（5%R+0.05Ω） | ||
| Moisture | 40℃, relative humidity 95% | △R≤±（3%R+0.1Ω） | ||
| Load Life | Rated load 1.5 hours on, 0.5 hours off 1000 hours | △R≤±（5%R+0.1Ω） | ||
| Virbration | 10Hz-50Hz/second, vibration in three directions for 2 hours each | △R≤±（1%R+0.05Ω） | ||
| Resistance to soldering Heat | 275℃ 2 hours | △R≤±（1%R+0.05Ω） | ||
| Dielectric Strength | AC 1500V | △R≤±（1%R+0.05Ω） | ||
| Insulauon Resistance | DC 500V 1 minute | >100MΩ | ||
| Temperature Coefficient | <±300PPM | |||
Terminal strength | 2Tensile force: 25N 10S | The terminal must not be broken or loose △R≤±（1%R+0.05Ω） | ||
Precharge Resistor for PUD Inverter (RX18-60W-300RJ-L350) | Precharge Resistor for PUD Inverter (RX18-60W-300RJ-L350) | |||
| Power | Resistace value | Tolerance | View | |
| 60w | 300Ω | ±5%（J） | ||
Item | Tested | Requirement | ||
| Overload | 10 times rated power for 5 seconds | △R≤±（2%R+0.05Ω） | ||
| Moisture | 40℃, relative humidity 95% | △R≤±（3%R+0.1Ω） | ||
| Load Life | Rated load 0.5 hours on, 1.5 hours off,1000 hours | △R≤±（5%R+0.1Ω） | ||
| Virbration | 10Hz-50Hz/second, vibration in three directions for 2 hours each | △R≤±（1%R+0.05Ω） | ||
| Resistance to soldering Heat | 275℃ | △R≤±（1%R+0.05Ω） | ||
| Dielectric Strength | AC 2500V | △R≤±（0.2%R+0.05Ω） | ||
| Insulauon Resistance | DC 1000V one minute | >1000MΩ | ||
| Temperature Coefficient | <±250PPM | |||
Terminal strength | 2Tensile force: 25N 10S | △R≤±（1%R+0.05Ω）Terminals shall not be broken or loose. | ||
Precharge Resistor for PUD Inverter (RX18-200W-100RJ) | Precharge Resistor for PUD Inverter (RX18-200W-100RJ) | |||
| Power | Resistace value | Tolerance | View | |
200w | 100Ω | ±5%（J） | ||
Item | Tested | Requirement | ||
| Overload | 10 times rated power for 5 seconds | △R≤±（2%R+0.05Ω） | ||
| Moisture | 40℃, relative humidity 95% | △R≤±（3%R+0.1Ω） | ||
| Load Life | Rated load 0.5 hours on, 1.5 hours off,1000 hours | △R≤±（5%R+0.1Ω） | ||
| Virbration | 10Hz-50Hz/second, vibration in three directions for 2 hours each | △R≤±（1%R+0.05Ω） | ||
| Resistance to soldering Heat | 275℃ | △R≤±（1%R+0.05Ω） | ||
| Dielectric Strength | AC 2500V | △R≤±（0.2%R+0.05Ω） | ||
| Insulauon Resistance | DC 1000V one minute | >1000MΩ | ||
| Temperature Coefficient | <±250PPM | |||
Terminal strength | 2Tensile force: 25N 10S | △R≤±（1%R+0.05Ω）Terminals shall not be broken or loose. | ||
